Heating products - Tigex® 25
|
|
Tigex 25 |
|
| Output |
up to 25 kW |
| Max. chimney height |
up to 8 m |
| Max. chimney dia./area |
Ø130 mm/169 cm² |
|
| Output |
up to 100 kW |
| Max. chimney height |
up to 14 m |
| Max. chimney dia./area |
Ø200 mm/338 cm² |
|
| Tigex® 25 - draught stabiliser from SPX Tigerholm |
 |
|
Tigex draught stabiliser, developed and patented by SPX Tigerholm, is manufactured in stainless steel and is the market's only draught stabiliser with a fully balanced damper. In practical terms, this means it can be fitted in almost any position (angled, vertical or horizontal). Since its market introduction in Sweden in 1994, Tigex continues to be the first choice among the HVAC installers and boiler manufacturers of the private house segment.
| TIGEX DRAUGHT STABILISER |
| Article No. |
Description |
| 60300E |
Tigex 25 for mounting on flat collector box or bracket plate |
|
 |
|
| TIGEX 25 DRAUGHT STABILISER |
| Article No. |
Description |
| 60390/100E |
Tigex 25 with adapter for round flue pipe Ø 100 mm |
| 60390/115E |
Tigex 25 with adapter for round flue pipe Ø 115 mm |
| 60390/120E |
Tigex 25 with adapter for round flue pipe Ø 120 mm |
| 60390/130E |
Tigex 25 with adapter for round flue pipe Ø 130 mm |
| 60390/150E |
Tigex 25 with adapter for round flue pipe Ø 150 mm |
|
 |
|
BRACKET PLATES FOR INSULATED 90° TEE |
Article No. |
Description |
60362E |
Tigex 25 adapter for insulated T with OD 130 mm |
60363E |
Tigex 25 adapter for insulated T with OD 150 mm |
60364E |
Tigex 25 adapter for insulated T with OD 180 mm |
60365E |
Tigex 25 adapter for insulated T with OD 200 mm |
|
 |
|
| BRACKET PLATES FOR TIGEX 25 |
| Article No. |
Description |
Drawings (pdf) |
| 60350E |
for CTC 161, 171, 265, Total, Elkombi, EV 115, Regent and more |
60350S |
| 60351E |
for CTC 130, 170, Egor TE71, D1, Värmebaronen, TMV & Diom |
60351S |
| 60352E |
for Euronom A-25 och Norah 3000 |
60352S |
| 60353E |
for Soot door Nr. 1 |
60353S |
| 60354E |
för Soot door Nr. 2 |
60354S |
| 60386E |
for square flue pipes |
60386S |
| 60335E |
for Focus |
60335S |
| 60361E |
for CTC repair set |
60361S |
| 60355E |
for embedding in brick (140 x 140 mm) |
60355S |
For other applications, please contact SPX Tigerholm
 back to top
|
| Some common applications |
 |
|
|
|
 |
| Tigex 25 with integrated adapter (60390/130E) for round flue pipe Ø130 mm |
Tigex 25 (60300E) with separate adapter (60364E) for insulated T with OD 180 mm |
|
Tigex 25 with integrated adapter (60390/100E) for round flue pipe Ø100 mm |
| |
|
|
|
|
|
|
|
Tigex 25 (60300E) with separate adapter (60361E), shown at 45° angle |
Tigex 25 (60300E) with separate adapter (60355E) for embedding in brick |
|
Tigex 25 (60300E) with separate universal adapter (60351E), shown at 45° angle |
| |
|
|
|
|
|
